Removing The Pull Tractor - Epson ActionPrinter L-1000 User Manual

After removing the parts, store the packaging materials in case you
ever need to transport your printer.
CAUTION:
printer designed for different electrical standards. The
power supply type is shown on the label on the back of
the printer. If it does not
your country, contact your dealer. It is not possible to
adjust

Removing the pull tractor

By removing the pull tractor now, you will be prepared to perform
the printer's self test later. Follow these steps to remove the pull
tractor:
1. Raise the tractor cover to the upright position. Then lift the
cover up and off.
Note: Remove the packaging material inserted between both sides
of tractor unit and the tractor cover. Be sure to store this
the
material with the other packaging materials in case you ever need
to transport the printer.
There are several different versions of the
printer for use on another voltage.
the
the correct voltage for
show
Setting Up the Printer
Unpacking the Printer
1-3