Connecting A Dvd Player With Component Video Connectors - Sony KE-32TS2U Operating Instructions Manual

Installing and Connecting the TV
Connecting a DVD Player with Component Video
Connectors
This is the preferred hookup to use if:
• Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the DVD player's
Y, B-Y and R-Y jacks to the Y/G, PdB and PUR .lacks on the TV. Use
the VIDEO IN 4 connections.
Tip
The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled as Y, C_ and C_,
or Y, Pr_and P_. If so, connect the cables to the matching colors.
2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks. Be sure to use the same row of inputs that
you used for the video connection.
Rear of TV
2
RK-74A (not supplied) ----_
PdB
Y/G
t
,----_ _ VMC-IOHG (not supplied)
j_.f
tt
Note
Set "Video 4 Mode" to "Y/PB/PR" in the [_ (Initial Setup) menu (see page 32).
Tips
• To take advantage of the Wide Screen Modes, set the TV's aspect ratio to 16:9 on your
DVD player. For details, refer Io the operaling instructions supplied with your DVD player.
• Some DVD players are equipped with the three component video conneclorsP: Y-Green, P_
(CI_, C_ or B-Y) -Blue and P_ (C_, C, or R-Y) -Red.
14 (us)