Connecting A Satellite Receiver With A Vcr - Sony KE-32TS2U Operating Instructions Manual

Installing and Connecting the TV
Connecting a Satellite Receiver with a VCR
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's SATELLITE
IN jack.
2 Connect the CATV cable to the VCR's VHF/UHF IN jack.
3 Using the supplied 75-ohm coaxial cable, connect the VCR's OUT jack
to the TV's VHF/UHF jack.
4 Using AUDIO and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO
IN jacks.
5 Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
Rear of TV
AUDIO-R (red) __A ,
AUDlO-L(white)-_-_ *'_
VIDEO (yellow) _ _" """
VMC-810S/820S -°-
(not supplied)
VH_UHF
• -- S VIDEO
75-ohm
coaxial cable
(supplied)
-_- YC-15V/30V (not supplied)
Satellite
|
antenna _ 1
Satellite receiver cable
I %"
YC-, 5V/30V d. _t supplied )
(not supplied)
VCR
Tips
• Be sure your VCR's video input is set correctly. Consult your VCR's operating manual for
instructions.
• Use TV/VIDEO on the remote to select VIDEO IN 1 to watch satellile TV or the VCR
(your VCR must be turned on). Use 0-9 and ENTER or CH +1- on the remole to watch
cable TV.
• If your VCR or satellite receiver is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
12 (us)