Connecting A Dvd Player; Connecting A Dvd Player With Component Video Output Connectors - Sony KV-EF34 Operating Instructions Manual

Connecting a DVD player

Connect ... 1, 2, or 3 (video input) /
LINE OUT on your DVD player.
DVD player
LINE OUT
R-AUDIO-L VIDEO
Audio/Video cable
(not supplied)
Connecting a DVD player with component video
output connectors
1 Connect R and L under
AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, C
input) on your TV to the COMPONENT VIDEO OUT Y, C
connectors on your DVD player.
DVD player
COMPONENT VIDEO OUT S VIDEO OUT
C C Y
R B
To audio
output
Component
video cable
(not supplied)
To component
video output
Notes
• Some DVD player terminals may be labeled differently:
• Since the high quality pictures on a DVD disc contain a lot of information,
• Connect your DVD player directly to your TV. Connecting the DVD player
(component video input) on your TV to the LINE OUT,
LINE OUT
R-AUDIO-L VIDEO
Audio cable
(not supplied)
Connect To (on the DVD player)
Y (green) Y
C (blue) C , B-Y or P
B b
C (red) C , R-Y or P
R r
picture noise may appear. In this case, adjust the sharpness ("SHARP") in the
PERSONAL ADJUST menu of the PICTURE MODE menu (see page 30).
through other video equipment will cause unwanted picture noise.
(audio/video) connectors on your TV to
1 2 3
L(MONO)
R
To ... 1, 2, or 3
(video input)
(yellow)
-L (MONO) (white)
-R (red)
, and C under
B R
B
R L Y C
B
To
L (white)
R (red)
To
(component
video input)
B
R
: Signal flow
(component video
, and C output
R
C
R
: Signal flow
Using Your New TV
7