Canon imageCLASS 2200 Reference Manual page 152

1
2
3
3
4
3-42 Adjusting the Machine (Adjustment/Cleaning)
Call up the desired screen as follows:
(Additional Functions)
Select "On" or "Off," and press "OK."
To disable Staple/Offset, press "Off."
To enable Staple/Offset, press "On."
Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Turn the main power switch off. Allow at least 3 seconds, before
turning the main power switch back on.
Exposure