Setting Entry Tone, Error Tone, And Job Done Tone - Canon imageCLASS 2200 Reference Manual

Setting Entry Tone, Error Tone, and Job Done Tone

You can select whether or not to sound audible tones. The following tones sound at the
following times:
• Entry Tone: When pressing keys on the control panel or keys on the touch panel display.
• Error Tone: When a malfunction occurs (e.g., paper jam or operational error).
• Job Done Tone: After the last copy has been made (e.g., outputting, stapling, or faxing is
completed).
NOTE
•
The default setting is "On" for all tones.
1
Call up the desired screen as follows:
(Additional Functions)
2
Select "On" or "Off" for Entry Tone, Error Tone, and Job Done Tone,
and press "OK."
3
Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting Specifications That Are Common to Each Function (Common Settings)
Audible Tones
3-11
3