Function Table And Default Factory Settings; Dcp-7065Dn, Mfc-7360N, Mfc-7460Dn And Mfc-7860Dn - Brother MFC-7360N User Manual

Control panel setup

Function table and default factory settings

DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN

The factory settings are shown in Bold with an asterisk.
Main menu Submenu
3.Network 1.TCP/IP
(DCP-7065DN)
5.Network
(MFC-7360N and
MFC-7460DN)
6.Network
(MFC-7860DN)
Menu selections Options
1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
7.WINS Server Primary
Secondary
8.DNS Server Primary
Secondary
9.APIPA On*
Off
0.IPv6 On
Off*
1
1
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5
5
5
38