Configuring Your Machine For A Wireless Network (For Infrastructure Mode And Ad-Hoc Mode); Using The Setup Wizard From The Control Panel; Using Wps Or Aoss™ From The Control Panel Menu To Configure Your Machine For A Wireless Network (Push Button Configuration) - Brother MFC-7360N User Manual

Configuring your machine for a wireless network (For HL-2280DW, DCP-7070DW and MFC-7860DW)
Configuring your machine for a wireless network
(For Infrastructure mode and Ad-hoc mode)
IMPORTANT
• If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation. You must know your wireless network settings before you
proceed with this installation.
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, a or b to choose Network,
press OK. Press a or b to choose Network Reset, press OK. Press 1 to reset and then press 1 to accept
the change. The machine will restart automatically.

Using the Setup Wizard from the control panel

You can configure your Brother machine by using the Setup Wizard function. This is located in the
Network menu on the machine's control panel.
 If you are configuring your machine using Wi-Fi Protected Setup (PIN Method), see Using the PIN Method
of Wi-Fi Protected Setup on page 20.
 Other methods of configuration from the control panel:
• To configure your machine for an existing wireless network using the SSID and Network Key (if
required), see the Quick Setup Guide.
• If your WLAN access point/router is set to not broadcast the SSID name, see Configuring your machine
when the SSID is not broadcast on page 17.
Using WPS or AOSS™ from the control panel menu to configure your machine
for a wireless network (Push Button Configuration)
If your WLAN access point/router supports either Wi-Fi Protected Setup (PBC
configure the machine easily without knowing your wireless network settings. Your Brother machine has the
WPS/AOSS™ menu on the control panel. See the Quick Setup Guide for more information.
1
Push Button Configuration
1
) or AOSS™, you can
3
3
3
3
16