Step By Step Chart For Wireless Network Configuration; For Infrastructure Mode - Brother MFC-7360N User Manual

Configuring your machine for a wireless network (For HL-2280DW, DCP-7070DW and MFC-7860DW)

Step by step chart for wireless network configuration

For Infrastructure mode

a
Confirm your network environment. See page 11.
 Infrastructure mode
Connected to a computer with a WLAN access
point/router
b
Confirm your wireless network setup method. See page 12.
Using the Setup
Wizard from the
control panel
(Recommended)
c
Configure your machine for a wireless network. See page 16.
See the Quick Setup
Guide
Wireless configuration and installing the printer driver have been completed.
Using WPS/AOSS™
from the control
panel menu
(Push Button
Configuration)
See the Quick Setup
Guide
Installing drivers and software (See the Quick Setup Guide)
 Ad-hoc mode
or
Connected to a wireless capable computer
without a WLAN access point/router
Using the Brother
installer
application
Using WPS/AOSS™, a USB or
network cable
See page 22
See page 10
Using the PIN
Method of Wi-Fi
Protected Setup
See page 20
3
3
3
9