The OPERATION MENU
After the power-on self test completes successfully, the diagnostics start
and you see the OPERATION MENU:
OPERATION MENU
1 - S e t u p
- Format hard disk
Enter selection number:
You select one of the diagnostics programs by pressing a number from
to
and pressing
1
5
order listed on the OPERATION MENU.
Option 3, Format diskette, is included on the OPERATION MENU for
convenience only. This option lets you format diskettes for use by the System
diagnostics tests without exiting from the diagnostics programs.
To use the extra utility programs on the diagnostics diskette (which do
not appear on this menu), select 0 from the OPERATION MENU. Then
start the utility from the MS-DOS prompt.
Exiting Diagnostics
Option 0 exits the diagnostics programs in one of the following ways:
If you have not run a diagnostics program, you see this selection on the
l
OPERATION MENU:
In this case, when you press 0 and
1-2
This manual describes each menu item in the
Enter.
you see the MS-DOS prompt.
Enter,