The status of the Num Lock, Caps Lock, and Scroll Lock indicators is
shown on the upper right side of the keyboard layout.
These messages appear on the screen:
KEYBOARD CHECK
Press Y followed by ENTER to exit.
Press N followed by ENTER if screen and keyboard
do not match.
If all the keys function correctly and match the characters displayed, press Y
and then
Enter.
If all the keys function, but the characters displayed do not match the
keys, press
and
Y
DEVICE LIST, and check that you selected the correct keyboard layout.
You can find diagrams of all the international keyboard layouts in the
MS-DOS manual.
If any key is incorrect, press
and message, or print them out , and contact your Epson dealer.
Monochrome Display Adapter and CRT Check
Use this option to check the operation of a monochrome display adapter
and monitor. This test includes several checks that allow you to identify
particular problems related to the monochrome display. To run this check,
DIP switches 1-5 and 1-6 on the front panel must be set correctly for a
monochrome monitor.
You can select the individual checks from this menu:
MONOCHROME ADAPTER AND CRT CHECK MENU
1
- Monochrome adapter check
- Attribute check
- Character set check
- Sync check
- Run all above checks
Enter selection number:
5-8
then Enter.
Exit
Then reselect the keyboard test from the
and
Make a copy of the error code
N
Enter.
.