Resuming From An Error - Epson EQUITY Y14499113001 User Manual

You can specify that the test be performed one time only or any number
of times in the range from 1 to 9999. Running a test multiple times is for
reliability testing of essential functions only; in most cases, running a test
only once is sufficient.
To perform the test once only, press
a submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press
prompt:
Terminate checking if an error detected (Y/N)?
Press and
Y Enter
press and
N Enter
Y see this prompt:
OU
How
many times
Type the number of times you wish to repeat the test, then press
tests for the device now start.

Resuming from an error

If an error occures during a test, the test stops at that point, and an error
code and error message are displayed. If you want to record the problem,
you can print out the message on your printer. You see this prompt:
Do you want a printout of the error message(s)
(Y/N)?
To continue without printing the error
Before 1.(x1 request a printwt, he sure your printer is turned on and
on-line, and tllc p;ipcr is installed correctly. Then press
Printer is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the ix-oblcm
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to return to
the menu.
to terminate checking if the device produces an error, or
to repeat the tests regardless of an error.
(1-9999) :
Y am1 Enter
printing.
then The program displays
1 Enter.
and
2 Enter.
press
N
Y
You see this
The
Enter.
and
Enter.
and If the
Enter.
N