Epson 800 User Manual page 17

Introduction
Do not let the power cord become damaged or frayed.
If you use an extension cord with the printer, make sure
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating.
Also, make sure the total of all devices plugged into the wall
outlet does not exceed 15 amperes.
Except as specifically explained in this User's Guide, do not
attempt to service the printer yourself.
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered
the printer; if the printer has been dropped or the cabinet
damaged; if the printer does not operate normally or
exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
8