Epson Artisan 800 Quick Start Manual

C11ca29201 all-in-one printer
Hide thumbs Also See for Artisan 800:

Advertisement

Start Here
1
Unpack
(Included for
Canada only)
Canada only: For French speakers, remove the sticker from the backing sheet and
place it on the right side of the control panel.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
If anything is missing, contact Epson as described on the back
under "Any questions?".
Remove all protective materials.
1
Raise the scanner and remove the transportation lock.
2
Store the transportation lock as
shown.
3
Lower the scanner.
2
Turn on and adjust
1
Connect the power cable.

C aution:
computer yet.
*411555700*
*411555700*
Series
Ethernet cable
(gray)
Do not connect to your
Phone cord
(black)
Power cord

Advertisement

Table of Contents
loading

Summary of Contents for Epson Artisan 800

  • Page 1 Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. If anything is missing, contact Epson as described on the back under “Any questions?”. Remove all protective materials.
  • Page 2: Make Settings

    On button, then lift the Press the control panel to raise it. To lower the control panel, press the Unlock button. Caution: To avoid damaging your Artisan 800 Series, always press the Unlock button to lower the control panel. Make settings Select your language and country.
  • Page 3: Install Ink Cartridges

    Install ink cartridges Note: Don’t load paper before installing the ink cartridges. Raise the scanner. Unpack the ink cartridges. Remove only the yellow tape from each cartridge. C aution: Don’t remove any other seals from the cartridges. Insert the cartridges in the holder for each color. Press the cartridges down until they click.
  • Page 4 Squeeze the edge guides and slide them out. Then insert paper with the glossy or printable side face-down. Slide the edge guides against the paper. Lower the photo tray. Squeeze the edge guides and slide them out. Then insert 4 x 6-inch or 5 x 7-inch photo paper with the glossy or printable side face-down.
  • Page 5: Connect The Phone Cord

    Connect the phone cord To use the Artisan 800 Series for faxing, connect the included phone cord from a telephone wall jack to the LINE port on the Artisan 800 Series. To connect a telephone or answering machine, see the Basics Guide for instructions. Note: If you’re connecting to a DSL phone line, you must use a DSL filter or you won’t be able to fax.
  • Page 6 2-year limited warranty and 2-year toll-free customer support.* When you’re done, remove the CD. You’re ready to go! Enjoy your Artisan 800 Series! See your Basics Guide or on-screen Epson Information Center for instructions. Macintosh ® Make sure the Artisan 800 Series is NOT CONNECTED to your computer.
  • Page 7: Any Questions

    Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. For a video tutorial and other information about setting up a wireless network, go to: epson.com/support/wireless...
  • Page 8: Need Paper And Ink

    Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark and Supplies Central is a service mark of Seiko Epson Corporation. Claria is a registered trademark and Artisan is a trademark of Epson America, Inc.

Table of Contents