About indicator status
If an indicator turns on
If a problem occurs within the projector, it will be notified with the temperature indicator <WARNING TEMP.>/filter
indicator <WARNING FILTER>/shutter indicator <SHUTTER>/lamp indicator <LAMP 1 REPLACE> and <LAMP 2
REPLACE>.
Check the status of the indicators and take the following action.
Attention
■
z Make sure to follow the procedures in "Powering off the projector" (
implementing measures.
■
z If multiple indicators have turned on or are flashing, check the status of each indicator and take the appropriate
action.
Note
■
z Check the power status with the power indicator <POWER>. (
About indicator status
page 44) to control the power when
page 42)
ENGLISH - 87