[Hdmi Setup]; [Logo] - Panasonic PT-EX12KU Operating Instructions Manual

[Setting] menu

[HDMI setup]

If the image cannot be correctly displayed when an
external device is connected to the projector using
HDMI, change the settings.
1) Press ▲▼ to select [HDMI setup].
2) Press the <ENTER> button.
3) Press ▲▼ to switch the setting.
[Normal]
Select when the output from the
[Normal]
external device is "NORMAL
Select when the output from the
[Enhanced]
external device is "ENHANCED
*1: The titles of the output settings differ depending on the
device. For details, refer to the operating instructions of the
external device.

[Logo]

Sets logo selection and the PIN code for logo
selection.
1) Press ▲▼ to select [Logo].
2) Press the <ENTER> button.
■
z The sub menu 2 is displayed.
3) Press ▲▼ to select.
■ [Logo select] ■
1) Select [Logo select], and press the
<ENTER> button.
2) Press ▲▼ to switch the setting.
■
z The setting will change as follows each time
you press the button.
[Off]
[Off] Clears logo from screen.
Displays the image registered by the
[User]
*1
user.
Displays in the factory default
[Default]
settings.
*1: Available when the image is registered.
■
z "Logo Transfer Software" is required to register
the image.
76 - ENGLISH
[Enhanced]
*1 ".
*1
[User] [Default]
*1
■ [Logo PIN code lock] ■
Sets the system to make the setting and changing
of the "logo" only by the administrator.
1) Select [Logo PIN code lock], and press
the <ENTER> button.
■
z The PIN code input screen is displayed.
2) Press ▲▼◀▶ or the number (<0> -
<9>) buttons to enter the PIN code.
3) Press ▲▼◀▶ to select [Set].
4) Press the <ENTER> button.
■
z If the PIN code is accepted, the projector
returns to the sub menu 2.
5) Press ▲▼ to switch the setting.
".
[Off]
[Off]
[On]
Note
■
z The entered PIN code is displayed with * mark on
the screen.
■
z The factory default setting for the logo PIN code is
"4321".
z To re-enter a number, press ◀▶ to select the digit ■
to re-enter, then press ▲▼ or the number (<0> -
<9>) buttons to re-select the number.
■
z Move the cursor to [Cancel] and press the
<ENTER> button to return to the sub menu 2.
■
z If [Logo PIN code] and the number are displayed in
red, an error has occurred. Re-enter the number.
[On]
The logo selection can be changed
without the PIN code.
The PIN code is required to change
the logo selection.