Figure 2-20 Completing The Build; Figure 2-21 Changing The Debug Settings - Fujitsu FR Family FR60 Lite User Manual

32-bit microcontroller bits pot red can motor board

Hide thumbs Also See for FR Family FR60 Lite:

Table of Contents

AN07-00180-3E

The message pane at the bottom of the window shows a message as shown in "Figure 2-20 Completing

the build". A warning is displayed but the build has been successfully ended. (The warning indicates no

problem.)

Figure 2-20 Completing the build

Then, configure the debug settings. As shown in "Figure 2-21 Changing the debug settings", expand

"Debug", select "mon_38400.sup", and then right-click on it. A menu appears; click "Change Settings".

- 50 -

Table of Contents

Mb91f267n