Changing One-Touch (Fax-2440C Only) And Speed-Dial Numbers - Brother FAX-2440C User Manual

Changing One-Touch (FAX-2440C only) and
Speed-Dial numbers
If you try to store a One-Touch (FAX-2440C only) or Speed-Dial
number where a number has already been stored, the LCD will show
the name that has been stored there (or number) and will ask you to
do one of the following:
Press I to change the stored [05 :Mike
]
number,
z. Change
2 .Exit
--OR--
Press 2 to exit without making a change.
How to change the stored number or name:
m If you want to change a character, use 4 or } to position
the cursor under the character you want to change, and then
type over it.
If you want to erase the whole number or whole name, press
Stop/Exit when the cursor is under the first digit or letter.
The characters above and to the right of the cursor will be
deleted.
Enter a new number.
Press Menu/Set.
Follow the directions beginning at Step 4 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers. (See page 5-1
and 5-2.)
QUICK-DIAL NUMBERS AND DIALING OPTIONS 5 - 3