Dell 3110 Color Laser User Manual page 349

2.
NOTICE: If you have no root privilege, contact your system administrator.
# mount -F cdfs -o cdcase /dev/dsk/c1t2d0 /cdrom
# cd /tmp
# cp /cdrom/uxfilter.tar /tmp
# tar xvf UXFILTER.tar
NOTE: /dev/ds/clt2d0 is an example. Specify the CD-ROM device file for all workstations.
3. Type ./install.sh and run the installer.
# ./install.sh
4. Select the printer model to install.
Printer Model ?
1. Dell Color Laser Printer 3110cn
2. Exit
Enter Process No (1/2)? : 1
5. Specify the directory to install the utility.
Enter install directory name /usr/local/dellbin3110] :
directory is '/usr/local/dellbin3110' (y/n)[n]: y
6. Type the name of the output printer. Type delllp3110cn. Type the printer name to be registered with
the system.
Enter output-printer-name? : delllp3110cn
output-printer-name is 'delllp3110cn' (y/n)[y]: y
NOTE: The registered printer name can be verified by executing lpstat -v.
7. Type the logical printer name. Register dell3110cn. Type a printer name that has not already been
registered with the system.
Enter logical-printer-name? : dell3110cn
Printer-name is 'dell3110cn' (y/n)[y]: y
8. The utility will be installed in the directory specified at step 5. Registration will be executed here so
that the logical printer registered at step 7 can access the utility. As this process is automatically
executed, no input is required. With the above steps, the installation is complete.