Specifying The Password And Http Port Number Used On A Player In The Vspa-D7 Software - Sony VSP-NS7 Setup Instructions

The "VSP-NS7 Basic Settings" window closes, and
the added player appears in the "VSP-NS7 Setup"
window.
5
Repeat steps 2 to 4 to register all players to be added.
6
Check the items in the "System Setup" window, and
modify the "VSP-NS7 Operation Time" and "VSP-
NS7 Time Adjustment" settings, if necessary.
7
Check the player-related items, and modify the
settings, if necessary.
See "Making Player-Related Settings" (page 12) for
details.
8
Send the settings to the player.
See "Sending the Settings to the Players" (page 16)
for details.
Specifying the Password and HTTP
Port Number Used on a Player in the
VSPA-D7 Software
Normally, the VSPA-D7 software is used to specify the
password and HTTP port number used for communication
on a player, so that they are also stored in the VSPA-D7
software at the same time, and the VSPA-D7 software can
communicate with the player using them.
When the VSPA-D7 software cannot communicate with a
player because of mismatched password and/or HTTP port
number, you can specify these items on the player in the
VSPA-D7 software using the following operation.
Note
Note that this operation does not obtain the password and
HTTP port number from a player. It does not specify them
on a player, either
1
Click the
software to display the setup buttons, then click the
button.
The "VSP-NS7 Setup" window appears.
2
Right-click the desired player, then select [Connection
Settings] on the popup menu.
The "Connection Settings" window for the selected
player appears.
20
Reflecting the Settings of a Player
button in the VSPA-D7
3
Enter the password and the HTTP port number used
for communication on the selected player in the
corresponding text boxes, and click [OK].
Or, click [Use Default Settings].
The "Connection Settings" window closes in either
case.
When you enter the password and the HTTP port
number, they are stored in the VSPA-D7 software to
be used for communication with the selected player.
When you click [Use Default Settings], the default
password and the HTTP port number that were
specified on every player at the factory are stored in
the VSPA-D7 software.
4
Repeat steps 2 and 3 to store the password and HTTP
port number specified on each player in the VSPA-D7
software.