Changing Settings After Starting Operation; Adding A Player; Deleting A Player; Changing A Player's Network Address - Sony VSP-NS7 Setup Instructions

Changing Settings After
Starting Operation
To change the settings after starting operation, for
example, to add or remove players from the system, use the
following procedures.

Adding a Player

1
Set network addresses for the players that you want to
add, and register the players with the VSPA-D7
software.
See "Setting the Network Addresses for Players and
Registering the Players with the VSPA-D7 Software"
(page 8) for details.
2
Install the players whose network addresses you have
set.
See "Installation" (page 11) for details.
3
Make the detailed settings for the players to be added,
and register the display device(s) controlled by them
via the network, if any.
See "Making Player-Related Settings" (page 12) for
details.
4
Send the settings to the new players.
See "Sending the Settings to the Players" (page 16)
for details.
5
Click the
The "Group Settings" window appears.
6
Register the new players in one of the groups.
Or, create a new group and register the new players in
it.
For details about group operations, refer to the VSPA-
D7 Operating Instructions.

Deleting a Player

1
Click the
software to display the setup buttons, then click the
button.
button.
button in the VSPA-D7
The "VSP-NS7 Setup" window appears.
2
Select the player that you want to delete, and click
[Delete] in the "Manual Settings" group.
Changing a Player's Network
Address
See also "Setting the Network Addresses for Players and
Registering the Players with the VSPA-D7 Software"
(page 8) for details on the "Network Settings" window.
1
Click the
software to display the setup buttons, then click the
button.
The "VSP-NS7 Setup" window appears.
2
Select the player with the address you want to change,
and click [Network Settings].
The "Network Settings" window for the selected
player appears.
3
In the "IP Address" text box under "Use the following
IP address," enter the new address.
4
Edit or enter the subnet mask, IP address of the default
gateway, and the DNS servers to be used in the
corresponding text box, as necessary, then click [OK].
The entered IP address is specified on the selected
player, and the address appears in the "VSP-NS7
Setup" window.
Changing Other Player-Related
Settings
When you modify the following setting(s), you have to
send the modified settings to the player.
• The "VSP-NS7 Operation Time" and "VSP-NS7 Time
Adjustment" settings in the "System Setup" window
• The name and resolution of the player in the "VSP-NS7
Basic Settings" window
• Any of the settings in the "Detailed Settings" window
• Display device information in the "Register Displays"
window.
1
Click the
software to display the setup buttons.

Changing Settings After Starting Operation

button in the VSPA-D7
button on the VSPA-D7
17