Assign A Local Ip Address And Port For Your Camera - D-Link DCS-2102 - SECURICAM Network Camera User Manual

2) Assign a Local IP Address and Port for Your Camera

Click on the SETUP tab, and select Network Setup
A Local IP Address is required to configure your camera and to view your camera within your
local network. You may use the default camera IP Address of 192.168.0.20. If you wish to use a
different IP Address, be sure that the camera settings correspond to your network settings. The
Default Gateway will be the IP Address of your router's Local IP Address (e.g.192.168.0.1, if
you are using a D-Link router)
43