Related Manuals for D-Link Mydlink DCS-8200LH
Summary of Contents for D-Link Mydlink DCS-8200LH
- Page 1 Version 1.00 | July 30, 2016 mydlink connected home series User Manual HD 180-Degree Wi-Fi Camera DCS-8200LH...
- Page 2 Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to http://www.mydlink.com for the most current information.
-
Page 3: Table Of Contents
Using the mydlink Home App ..........15 Live View ................17 Camera Options ..............18 Change Camera Icon/Name ........18 Motion Detection ............19 Sound Detection ............20 Image Settings ..............21 Device Information .............22 My Actions ................23 Use DCH-S150 Motion Sensor with the Camera ...28 Troubleshooting ..............33 D-Link DCS-8200LH User Manual... -
Page 4: Product Overview
(Refer to the mobile app’s store page to see if your device is compatible) Network Device and Service • A wireless router (802.11ac/n/g) with Internet service • An e-mail account (required to create a mydlink® account) D-Link DCS-8200LH User Manual... -
Page 5: Introduction
Access your camera through the mydlink Home app to view and manage your HD 180-Degree Wi-Fi Camera through your tablet or mobile phone, no matter where you are. Pair your camera with other D-Link Connected Home products to take a... -
Page 6: Features
Use of audio or video equipment for recording the image or audio of a person without their knowledge and consent is prohibited in certain states or jurisdictions. The end-user assumes all liability for compliance with applicable state, local and federal laws. The DCS-8200LH is not supported by the mydlink.com web portal, mydlink Lite or mydlink + app. Additional Connected Home products sold separately. D-Link DCS-8200LH User Manual... -
Page 7: Hardware Overview
Used to illuminate the camera's field of view at night. The IR-Cut Removable sensor monitors lighting conditions and switches between color and Light Sensor infrared accordingly. Camera Stand Use as a camera stand or a mounting bracket. D-Link DCS-8200LH User Manual... - Page 8 Press and hold this button for 10 seconds to reset the camera back to the factory default settings. Press this button, then press the WPS button on your router to set up a secure wireless connection WPS Button automatically. D-Link DCS-8200LH User Manual...
-
Page 9: Wireless Installation Considerations
Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DCS-8200LH User Manual... -
Page 10: Installation
Note: Screen shots were captured from a Galaxy S7 smartphone (Android) using the mydlink Home app version 3.0.5. Note that images may differ on iOS device and may differ from a newer version of the mydlink Home app. D-Link DCS-8200LH User Manual... - Page 11 If you do not have a mydlink account, tap Sign up and follow the instructions to create a mydlink account. It is free and you just need a valid email account. After logging in, tap the Settings icon in the top-left corner. Select Add New Device. D-Link DCS-8200LH User Manual...
- Page 12 Note: In order for notifications to work, you must set up a rule first using the mydlink Home app’s My Actions page. Please refer to page 23 for details on how to set up a rule. D-Link DCS-8200LH User Manual...
-
Page 13: Mounting The Camera
3. Depending on the material of the wall or ceiling, use proper tools to drill two holes 25mm deep with a 6mm drill bit where you marked. If the wall is made out of concrete, drill the holes first, then insert the plastic anchors to support the screws. D-Link DCS-8200LH User Manual... - Page 14 5. Place the camera over the base plate and turn the camera clockwise to lock it in place. 6. Adjust the angle of the camera as desired. When adjusting the camera, use one hand to hold down the camera base to prevent it from moving. D-Link DCS-8200LH User Manual...
-
Page 15: Configuration
If you forgot your mydlink password, tap Forgot password?. If you do not have a mydlink account, tap Sign up and follow the instructions to create a mydlink account. It is free and you just need a valid email account. D-Link DCS-8200LH User Manual... - Page 16 Note that not all devices are compatible with the mydlink Home app. Tap the DCS-8200LH camera. Step 4 The current live view of the camera will be displayed. The next page will explain the functions of each option. D-Link DCS-8200LH User Manual...
-
Page 17: Live View
Day mode - Use in bright, well-lit environments. View and delete recordings Night mode - Use in dark areas or at Take a snapshot night. Select 360p or 720p Auto - Camera will automatically change modes (recommended). D-Link DCS-8200LH User Manual... -
Page 18: Camera Options
Section 3 - Configuration Camera Options Change Camera Icon/Name Tap the camera icon and select an Tap on the text to change the option from the menu to change camera name. the image: D-Link DCS-8200LH User Manual... -
Page 19: Motion Detection
4. To save your settings, tap the < in the upper left corner. To leave the screen without saving the settings, click the X in the upper right corner. D-Link DCS-8200LH User Manual... -
Page 20: Sound Detection
2. Move the slider up or down to the sound level you want. Any noise above the threshold you choose will trigger a notification. 3. To save your settings, tap the < in the upper left corner. To leave the screen without saving the settings, click the X in the upper right corner. D-Link DCS-8200LH User Manual... -
Page 21: Image Settings
1. Tap the button next to Ceiling Mount to turn on. 2. To save your settings, tap the < in the upper left corner. To leave the screen without saving the settings, click the X in the upper right corner. D-Link DCS-8200LH User Manual... -
Page 22: Device Information
If you want to reset the camera back to the factory default settings, tap Reset. Note that this will remove the camera from your mydlink account and you will have to reinstall and reconfigure it. D-Link DCS-8200LH User Manual... -
Page 23: My Actions
1. Tap the icon in the upper right corner to open the My Actions page. 2. Tap New action. 3. Enter a name for your rule and then tap Tap to select trigger. D-Link DCS-8200LH User Manual... - Page 24 4. Tap on the DCS-8200LH camera and select Motion Sensor. Note make sure you have set up motion detection on your camera and it is enabled. Refer to Motion Detection on page 19. 5. Tap Next. 6. Tap Tap to select responder. D-Link DCS-8200LH User Manual...
- Page 25 • DCS-8200LH camera - Will have the camera record the video to a microSD card installed on the camera (not included). 8. To add more responders, tap Tap to select responder. D-Link DCS-8200LH User Manual...
- Page 26 3 seconds before motion is detected and will record a 30 second clip. 10. Once you are done selecting responders, tap the button next to Send notifications when this action runs to enable and then tap Done. D-Link DCS-8200LH User Manual...
- Page 27 When the list of recordings appear, tap the one you want to watch. You can search by date or trigger by tapping the magnifying glass icon at the bottom. To delete videos, tap Delete in the upper right corner. D-Link DCS-8200LH User Manual...
-
Page 28: Use Dch-S150 Motion Sensor With The Camera
1. Tap the icon in the upper right corner to open the My Actions page. 2. Tap New action. 3. Enter a name for your rule and then tap Tap to select trigger. D-Link DCS-8200LH User Manual... - Page 29 Section 3 - Configuration 4. Tap on the DCH-S150. Note make sure you disable motion detection on your camera. Refer to Motion Detection on page 19. 5. Select Motion detected and tap Next. 6. Tap Tap to select responder. D-Link DCS-8200LH User Manual...
- Page 30 Section 3 - Configuration 7. Tap the DCS-8200LH camera. 8. The video recording settings will appear. The settings show are default and normally do not need to be changed. Tap Next to continue. D-Link DCS-8200LH User Manual...
- Page 31 Delete to remove the rule. If you want to turn off the action, simply tap the button to the right of the rule to disable it. Tap again to enable. D-Link DCS-8200LH User Manual...
- Page 32 When the list of recordings appear, tap the one you want to watch. You can search by date or trigger by tapping the magnifying glass icon at the bottom. To delete videos, tap Delete in the upper right corner. D-Link DCS-8200LH User Manual...
-
Page 33: Troubleshooting
• your camera is on the same network as your mobile device • both your mobile device and camera have a working Internet connection If your camera is still not working, check your router and make sure it has the latest firmware. D-Link DCS-8200LH User Manual... -
Page 34: Technical Specifications
• Operates on 2.4 GHz or 5 GHz bands Network Protocols • IPv4, ARP, TCP, UDP, ICMP • HTTP Server • DHCP Client • PPPoE • NTP Client (D-Link) • UPnP port forwarding • DNS Client • RTP, RTSP, RTCP • DDNS Client (D-Link) • HTTPS for configuration •... - Page 35 • Operating: 32 to 104° F • Storage: -4 to 158˚ F Humidity • Operating: 20% to 80% non-condensing • Storage: 20% to 80% non-condensing Certifications • CE • FCC Class B • CE LVD • ICES D-Link DCS-8200LH User Manual...
-
Page 36: Contacting Technical Support
• Hardware Revision (located on the label on the back of the camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the back of the camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. -
Page 37: Warranty
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. - Page 38 Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
- Page 39 D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
- Page 40 FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
- Page 41 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office.
- Page 42 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
-
Page 43: Registration
Appendix D - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.00 July 30, 2016 D-Link DCS-8200LH User Manual...