Fine Tuning Functions; “B” Group Parameters - Hitachi L200 Series Instruction Manual

Fine Tuning Functions

"B" Group Parameters
Func.
Code
B001 Selection of automatic restart
mode
B002 Allowable under-voltage power
failure time
B003 Retry wait time before motor
restart
B004 Instantaneous power failure /
under-voltage trip alarm enable
B005 Number of restarts on power
failure / under-voltage trip events
B012 Level of electronic thermal
setting
B212 Level of electronic thermal
setting, 2nd motor
B013 Electronic thermal characteristic
B213 Electronic thermal characteristic,
2nd motor
B021 Overload restriction operation
mode
B022 Overload restriction setting
B023 Deceleration rate at overload
restriction
B031 Software lock mode selection
B032 Reactive current setting
B080 [AM] analog signal gain
B082 Start frequency adjustment
B083 Carrier frequency setting
B084 Initialization mode (parameters
or trip history)
B085 Country code for initialization
Name
current for
inverter
current for
inverter
current x
Default Setting
-FEF -FU
(EU) (USA)
00 00
1.0 1.0
1.0 1.0
00 00
00 00
Rated Rated
current for
each each
inverter
Rated Rated
current for
each each
inverter
01 01
01 01
01 01
Rated Rated
current x
1.5 1.5
1.0 30.0
01 01
100 100
100. 100.
0.5 0.5
5.0 5.0
00 00
01 02
C–7
L200 Inverter
User
Setting