Test Menu - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

5.2.5 Test Menu

The Test menu tests or checks the operation of the control circuit board.
Table 5-10. Test Menu Items
Test Item
o
Program
Version
o
Backup parameters
o
DIP-SW
o
Board Rev.
o
Panel buttons
Control Panel
o
LCD panel display
o
LED indicators
Sensors HP, Cover Open, Release Lever, P_FRONT, P_Rear,
Paper Thickness, PG, Thermistor, I/C Holder Levers,
Ink ID, I/C, and Ink Low
Encoder CR Motor, PF Motor
Fan On/Off confirmation
o
Maintenance Record
Elec.
o
Fatal Error Record
D/A Revision Factory use for Head voltage correction - do not attempt
Head Signal Factory use for Head pulse check - do not attempt
Do not attempt the D/A Revision or Head Signal test.
These tests are only performed with special
equipment during the manufacturing process. Any
changes will mar print quality
Adjustment
Description
Adjustment Steps
The menu items and their order in the menu are shown below.
[Pause] returns you
to previous menu
[SelecType]
Test: Version
Test: Panel
Test: Sensor
Test: Encoder
Test: Fan
Test: Elec.
Test: D/A Revision
Test: Head Signal
[Item]
Revision B
[Enter]
Other
menus
[Pause]
131