Disassembling The I/C Holder - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

4.2.4.2 Disassembling the I/C Holder

1. Unhook the hooks fixing the upper I/C guide and slide it backward. Then,
slide out a metal bracket that holds the I/C ID sensor board.
2. Remove the two screws (CP(W2) M3x4) securing the "HOLDER ASSY.,
VALVE, A" to a base frame.
3. If necessary, remove the I/C In sensor assembly or the Ink Low sensor
assembly .
Base frame
"HOLDER ASSY., VALVE,A"
Figure 4-58. I/C Holder
Disassembly & Assembly
Upper I/C guide
I/C ID Sensor board
Metal bracket
Bottom I/C guide
Disassembly Flow
Figure 4-59. I/C Holder Disassembly (1)
I/C In sensor
Figure 4-60. I/C Holder Disassembly (2)
Revision B
Upper I/C guide
Metal bracket
Ink low sensor
Bottom I/C guide
105