System Unit Front Panel Controls And Leds - HP Model 712/100 - Workstation Handbook

– Serial Interface and X.25 board
Serial interface is logically identical to the workstation's built–in serial
interface
X.25 supports 1.2 to 19.2kps
X.25 supports implementation of the LAP–B data–link protocol
Two–headed external cable allows simultaneous use of both functions
– Graphics card
Supports additional monitor, same type as system unit's
Optional I/O (supported by single TeleShare slot)
– TeleShare board: integrates the telephone into the workstation environment

System Unit Front Panel Controls and LEDs

Before powering on the system, you should become familiar with the system unit
controls.
Figure 1–1 shows the locations of the system unit front panel controls and LEDs.
System Power LED
System Power Switch
Floppy Drive Activity LED
(optional)
Floppy Drive Eject Button
(optional)
Figure 1–1. System Unit Front Panel Controls and LEDs
Product Information 1–3