Power Supply Cover; Removing The Power Supply Cover - HP Model 712/100 - Workstation Handbook
Hp 9000 series 700 model 712 service handbook (a2615-90039)
Hide thumbs
Also See for Model 712/100 - Workstation:
- Technical reference manual (94 pages) ,
- User reference (84 pages) ,
- User manual (62 pages)
Table of Contents
Advertisement
Power Supply Cover
Before removing the power supply cover, perform the following procedures:
Remove the stand.
Open the system unit.
Remove the speaker.
WARNING:
Do not turn on the workstation with the power supply
cover removed.
Perform the following steps to remove the power supply cover:
1. Disengage the power supply cover locking tab by pushing a small flat blade
screwdriver into the slot on the rear panel, as shown in Figure 5–19.
Figure 6–19. Removing the Power Supply Cover
Field Replaceable Units
5–29
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
