Setup For Printing From Apc; General Id Menu Selections - Brady IDXPERT User Manual

Setup for Printing from a PC
You may use your PC to create and print labels with your IDXPERT
download the printer driver provided on your product CD (or download the latest printer driver
firmware from Brady's website). Then connect the communications cable provided with your printer
from the IDXPERT to your PC's communication port.
TM
Step 1. On your IDXPERT
Step 2. Press
ENTER
Step 3. Press .
MENU
Step 4. Press the
NEXT
Step 5. Press the softkey beneath
able to receive data and send it to print.

General ID Menu Selections

Following is a list of the high-level General ID Menu selections and the corresponding softkeys:
To perform formatting using the General ID Menu, press MENU and the
corresponding softkey:
Label Format—Select general or wiremarker labels. Wiremarker mode
repeats text line(s) as many times as will fit on a label.
Continuous—Set either auto or fixed length, and separator type, for
terminal block and banner labels.
Justify—Set horizontal and vertical justification of label data.
Rotate—Set rotation of label data to 0, 90, 180, or 270 degrees.
Units—Change units—to inches, mms, or points—for displaying label and
font sizes.
Barcode—Add Code 39 and 128 with human readable text.
Set Time—Set time to print a real-time stamp on your label.
Set Date—Set date to print a real-time date stamp on your label.
Language—Change the default language.
Battery—View graphical indicator of energy remaining in battery.
PC—Connect to PC using communications cable.
See Appendix A—General ID Menu Tree on page 50 for a listing of submenus related to each
section.
10
TM
Handheld Labeler, press
to select the General ID display screen.
softkey three (3) times until you advance to the PC option.
to enable PC connectivity. At this point your printer will be
PC
Handheld Labeler. First
TM
.
POWER
Softkey
FRMT
CONT
JUST
ROT
UNIT
BAR
TIME
DATE
LANG
BATT
PC
User Manual