Cisco IE-3000-8TC Command Reference Manual page 384

show etherchannel
Port-channel
Port index
Flags:
Local information:
Port
Gi1/1
Age of the port in the current state: 01d:20h:06m:04s
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
HotStandBy port = null
Port state
Protocol
Ports in the Port-channel:
Index
------+------+------+------------------+-----------
0
0
Time since last port bundled:
This is an example of output from the show etherchannel 1 summary command:
Switch> show etherchannel 1 summary
Flags:
Number of channel-groups in use: 1
Number of aggregators:
Group
------+-------------+-----------+----------------------------------------
1
This is an example of output from the show etherchannel 1 port-channel command:
Switch> show etherchannel 1 port-channel
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
HotStandBy port = null
Cisco IE 3000 Switch Command Reference
2-358
= Po1 GC
= 0 Load = 0x00
S - Device is sending Slow LACPDUs
A - Device is in active mode.
LACP port
Flags State Priority
SA bndl 32768
Port-channels in the group:
----------------------
(Primary Aggregator)
= 01d:20h:20m:26s
= 10/1
= Port-channel Ag-Inuse
= LACP
Load Port EC state
00 Gi1/1 Active
00 Gi1/2 Active
D - down P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
u - unsuitable for bundling
U - in use f - failed to allocate aggregator
d - default port
Port-channel Protocol
Po1(SU) LACP
Port-channels in the group:
----------------------
(Primary Aggregator)
= 01d:20h:24m:50s
= 10/1
Chapter 2 IE 3000 Switch Cisco IOS Commands
= - Pseudo port-channel = Po1
Protocol =
F - Device is sending fast LACPDU
P - Device is in passive mode.
Admin Oper
Key Key
0x0 0x1
Number of ports = 2
No of bits
0
0
01d:20h:20m:20s Gi1/2
1
Ports
Gi1/1(P) Gi1/2(P)
Number of ports = 2
LACP
Port Port
Number State
0x0 0x3D
OL-13019-01