Ip Dhcp Snooping Database - Cisco IE-3000-8TC Command Reference Manual

Command reference
Hide thumbs Also See for IE-3000-8TC:
Table of Contents

Advertisement

Chapter 2
IE 3000 Switch Cisco IOS Commands

ip dhcp snooping database

Use the ip dhcp snooping database global configuration command to configure the DHCP snooping
binding database agent. Use the no form of this command to disable the agent, to reset the timeout value,
or to reset the write-delay value.
Syntax Description
flash:/filename
ftp://user:password@host/filename
http://[[username:password]@]
{hostname | host-ip}[/directory]
/image-name.tar
rcp://user@host/filename
tftp://host/filename
timeout seconds
write-delay seconds
Defaults
The URL for the database agent or binding file is not defined.
The timeout value is 300 seconds (5 minutes).
The write-delay value is 300 seconds (5 minutes).
Command Modes
Global configuration
Command History
Release
12.2(44)EX
OL-13019-01
ip dhcp snooping database {{flash:/filename | ftp://user:password@host/filename |
http://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar |
rcp://user@host/filename | tftp://host/filename} | timeout seconds | write-delay seconds}
no ip dhcp snooping database [timeout | write-delay]
Modification
This command was introduced.
Specify that the database agent or the binding file is in the flash
memory.
Specify that the database agent or the binding file is on an FTP
server.
Specify that the database agent or the binding file is on an FTP
server.
Specify that the database agent or the binding file is on a
Remote Control Protocol (RCP) server.
Specify that the database agent or the binding file is on a TFTP
server.
Specify (in seconds) how long to wait for the database transfer
process to finish before stopping.
The default is 300 seconds. The range is 0 to 86400. Use 0 to
define an infinite duration, which means to continue trying the
transfer indefinitely.
Specify (in seconds) the duration for which the transfer should
be delayed after the binding database changes. The default
is 300 seconds. The range is 15 to 86400.
Cisco IE 3000 Switch Command Reference
ip dhcp snooping database
2-137

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie 3000

Table of Contents