Cisco IE-3000-8TC Message Manual page 19

Chapter 2 Message and Recovery Procedures
Error Message ACLMGR-3-NOLABEL: Cannot allocate [chars] label for interface [chars].
Explanation
means that the hardware cannot be programmed to implement the features, and packets for this
interface will be filtered in software. There is a limit of 256 labels per direction. The first [chars] is
the direction (input or output); the second [chars] is the interface name.
Recommended Action
possible.
Error Message ACLMGR-3-OUTTTABLE: Not in truth table: RACL [dec] VLMAP [dec].
Explanation
features. [dec] are internal action codes.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
running-config user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message ACLMGR-3-QOSTTABLE: Not in truth table: ACL [dec] in map, action [dec].
Explanation
ACL number, and the second [dec] is the action corresponding to the specified ACL number.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message ACLMGR-3-RELOADED: Reloading [chars] label [dec] feature.
Explanation
the hardware. One or more features had previously been unloaded because of lack of space. [chars]
is the direction (input or output), and [dec] is the label number.
Recommended Action
Error Message ACLMGR-3-UNKNOWNACTION: Unknown VMR access group action [hex].
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
OL-13020-01
The ACL manager was unable to allocate a label for the features on this interface. This
Use a simpler configuration. Use the same ACLs on multiple interfaces, if
An unrecoverable software error occurred while trying to merge the configured output
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
A software error occurred while trying to merge a QoS policy map. The first [dec] is the
Copy the message exactly as it appears on the console or in the system log.
The ACL manager is now able to load more of the configured features on this label into
No action is required.
An internal software error has occurred. [hex] is an internal action code.
Copy the message exactly as it appears on the console or in the system log.
1-4.
1-4.
Cisco IE 3000 Switch System Message Guide
ACLMGR Messages
"Error
2-5