Program Table; Setting A Wash Program - Baumatic BDF682SL Instruction Manual

Program table

Program Wash
program
3 in 1
Normal
(*)
Intensive
Economy
Rinse
Light
Rapid
* Normal is the testing program for EN 50242.

Setting a wash program

Make sure that the before first use section has been
followed.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
Wash program
information
For normally soiled
loads, such as pots,
plates, glasses and
lightly soiled pans.
Standard daily cycle.
For normally soiled
loads, such as pots,
plates, glasses and
lightly soiled pans.
Standard daily cycle.
For the heaviest
soiled loads, such as
pots, pans, casserole
dishes and dishes that
have been sitting with
dried food on them
for awhile.
For lightly soiled
loads, such as plates,
glasses, bowls and
lightly soiled pans.
For dishes that need
to be rinsed and dried
only.
For lightly soiled
loads, such as
glasses, crystal and
fine china.
A shorter wash for
lightly soiled loads
that do not need
drying.
Description Detergent
of cycle (pre/main)
Pre-wash
(50°C)
Pre-wash
Wash (45°C)
Rinse
Rinse (70°C)
Drying
Pre-wash
Pre-wash
Wash (50°C)
Rinse (70°C)
Drying
Pre-wash
Pre-wash
(50°C)
Wash (60°C)
Rinse (70°C)
Drying
Pre-wash
Wash (45°C)
Rinse (60°C)
Drying
Wash (45°C)
Rinse (70°C)
Drying
Pre-wash
Wash (40°C)
Rinse (70°C)
Drying
Wash (40°C)
Rinse (45°C)
5/25 g
5/25 g
25 g
N/A
20 g
20 g
21