Add Designs Feature
The Add Designs feature allows you to embellish the lettering in
your design with extra decorative embroidery. With Add
Designs, you can choose from among a wide variety of embroi-
dery accents, borders, frames, and appliqué shapes and place
them in you design using only the mouse buttons. These
designs come pre-loaded with your Pacesetter BES Lettering
software.
To use the Add Designs tool:
1 In the Home tab of the Ribbon, click on the Add Designs
tool.
You see an option menu.
2 From the option menu, choose any one of the following:
Add Accent Design
Add Appliqué Design
Add Border Design
Add Frame Design
Your pointer changes to a small cross, indicating that the Add
Designs tool is active. Notice that the heading in the
Properties Panel changes to Add Design.
3 In the Properties Panel, click on the down arrow in the
Accent, Appliqué, Border, or Frame field (whichever is
applicable) to display a list of available decor types.
Depending on whether you have chosen an Accent, Frame,
Border, or Appliqué, you will see a different set of options in
the list.
4 From the list, click on the one you wish to apply to the
design.
Editing Designs 103