Cleaning the filters
For best performance and results, the entire filter assembly should be
thoroughly cleaned regularly (ideally after each wash cycle).
4. Place the fine filter back in its original position.
5. Place the main and coarse filter back into their original positions
in the base of the dishwasher. You must turn the coarse filter
clockwise to lock it back into position.
IMPORTANT: If a glass gets smashed inside of the appliance,
you must check there is no glass in the filter before the
machine is used again as this can cause a drainage failure.
IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.
27
1. Turn the coarse filter anti-
clockwise
and
upwards.
Rinse
section under a tap to remove
any food debris that remains
in it.
2. Pull out the main filter and
rinse this under the tap to
remove any food debris that is
trapped in it.
3. Pull out the fine filter and
rinse this under the tap to
remove any food debris that is
trapped in it.
then
lift
it
out
this