Cisco 3750G - Catalyst Integrated Wireless LAN Controller Configuration Manual page 792

Displaying Standard QoS Information
Table 33-15 Commands for Displaying Standard QoS Information (continued)
Command
show mls qos queue-set [qset-id]
show mls qos vlan vlan-id
show policy-map [policy-map-name [class
class-map-name]]
show running-config | include rewrite
Catalyst 3750 Switch Software Configuration Guide
33-80
Purpose
Display QoS settings for the egress queues.
Display the policy maps attached to the specified SVI.
Display QoS policy maps, which define classification criteria for
incoming traffic.
Do not use the show policy-map interface privileged
Note
EXEC command to display classification information
for incoming traffic. The control-plane and interface
keywords are not supported, and the statistics shown in
the display should be ignored.
Display the DSCP transparency setting.
Chapter 33 Configuring QoS
OL-8550-02