Dell 5110cn - Color Laser Printer User Manual page 104

Connectivity Technology Wireless
Compliant Standards
Bandwidth
Data Transfer Rate
Device Type
Security
To use the Wireless Printer Adapter, an optional multi protocol card is required.
If an optional multi protocol card is not installed, be sure to install it by following the steps in
Multi Protocol Card".
1. Make sure that the printer is turned off and unplug all cables including the power cord from the rear of
the printer.
2. Remove the upper screw on the wireless port cover from the back side of the controller card.
3. Remove the cover from the controller card by the handles.
4. Check that the Wireless Printer Adapter is positioned with the USB mark on the top, and then insert the
adapter until it stops.
5. Check that the Wireless Printer Adapter cap is positioned with the
the cap until it clicks.
802.11b/802.11g
2.4GHz
11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
11b mode: 11, 5.5, 2, 1 Mbps
Wireless Printer Adapter
64(40-bit key)/128(104-bit key) WEP Encryption/WPA/WPA2
"Installing a
mark facing up, and then attach