Alternate User Code; Erasing Alternate User Codes - GE 45146- - Keypad Transmitter Remote User Manual

Step 2. Enter a number (1, 2, or 3) for the User code
you would like to change (1=Master code, 2= User 2
code, 3 = User 3 code).
Step 3. Press and release the Green button.
Step 4. Enter the new 4-digit code. Press and release
the Green button.
Step 5. Re-enter new 4-digit code again. Press and
release the Green button.
The LED will flash 5 times and turn off indicating the
code for that User code has been stored/changed.
Example: To set User 2 code to 2222
Press and release the Green button
(The LED will turn on)
Enter 1,2,3,4 (Wireless keypad is now in Program Mode)
Press and release the green button
Enter 2
Press and release the green button
Enter 2,2,2,2
Press and release the green button
Re-enter 2,2,2,2
Press and release the green button (red LED will flash 5
times and turn off)
In this example, User 2 code has been set as 2222.
Erasing Alternate User Codes
Alternate user codes can be removed completely from
the memory if necessary. Note: the Master Code (1)
cannot be erased, only changed.
8