Table of Contents
Advertisement
a. mini SAS cable connector
b. metal tab
c. connector on the system board
6.
Disconnect all other cables from the system board.
CAUTION: Take care not to damage the system identification button while removing the system board from the
chassis.
7.
Grasp the system-board holder, lift the blue release pin, slide the system board toward the front of the system, and
lift the system board out of the chassis.
CAUTION: Do not lift the system board assembly by grasping a memory module, processor, or other components.
Figure 52. Removing and Installing the System Board
1. system board
2. system-board holder
3. release pin
95
Advertisement
Table of Contents
Troubleshooting
