Current Firmware Versions - HP ProLiant DL140 - G2 Server User Manual

Proliant dl100 series servers user guide
Hide thumbs Also See for ProLiant DL140 - G2 Server:
Table of Contents

Advertisement

Support new features
Correct problems in a previous ROM version
ROMPaq utility
The ROMPaq utility enables you to upgrade the system firmware (BIOS) or Lights-Out 100 firmware. To
upgrade the firmware, insert a ROMPaq diskette into the diskette drive or ROMPaq USB Key into an
available USB port and boot the system.
The ROMPaq utility checks the system and provides a choice (if more than one exists) of available
firmware revisions.
For more information about the ROMPaq utility, see the HP website (http://www.hp.com/go/support).

Current firmware versions

Automatic firmware updates
Subscriber's Choice (http://www.hp.com/go/subscriberschoice)
Manual firmware updates
Download the latest firmware updates from the HP website
(http://h18023.www1.hp.com/support/files/server/us/romflash.html).
Updating firmware
To update the firmware:
Check the firmware version on the device.
1.
Determine the latest firmware version available.
2.
If a TPM is installed and enabled on the server, disable BitLocker™ before updating the firmware.
3.
For more information, see the operating system documentation.
Update the firmware to the current version supported for the hardware configuration.
4.
Verify the firmware update by checking the firmware version.
5.
If a TPM is installed and enabled on the server, enable BitLocker™ after the firmware update is
6.
complete. For more information, see the operating system documentation.
Drivers
HP drivers and utilities can be found on the Support CD. For the latest drivers and information on
supported operating systems, refer to the HP website (http://www.hp.com/support).
IMPORTANT:
Always perform a backup before installing or updating device drivers.
Troubleshooting 57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents