Installing The Trusted Platform Module Board - HP ProLiant DL140 - G2 Server User Manual

Installing the Trusted Platform Module board

WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
WARNING:
internal system components to cool before touching them.
Power down the server.
1.
Remove the server from the rack, if necessary.
2.
Place the server on a flat, level work surface.
3.
Remove the access panel (on page 5).
4.
Access the TPM connector. See the server-specific installation sheet.
5.
CAUTION:
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to
ensure the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board.
6.
To reduce the risk of personal injury, electric shock, or damage to the equipment,
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Any attempt to remove an installed TPM from the system board breaks or disfigures
Hardware options installation 14