NEC NP901W - WXGA LCD Projector Network Setup Manual page 29

■ Setting Wired LAN
1
Display the "WIRED" page of "NETWORK SETTINGS".
Configure the setting of wired LAN in the "WIRED" page of "NETWORK SETTINGS" selected from
On-Screen Menu. If "NETWORK SETTINGS" is not displayed, refer to "4-1. Displaying On-Screen
Menu (NETWORK SETTINGS)" (
2
Select "PROFILES".
"PROFILE 1" or "PROFILE 2" can be stored in the memory of the projector as the setting of LAN.
<1> Press the SELECT
button.
<2> Use the SELECT /
button.
3
Set "DHCP".
Follow the same procedure as in "4-2. Wireless LAN" (
4
Input "IP ADDRESS", "SUBNET MASK", and "GATEWAY".
Follow the same procedure as in "4-2. Wireless LAN" (
5
Input "DNS CONFIGURATION".
Follow the same procedure as in "4-2. Wireless LAN" (
6
Reconnect the network.
<1> When all the above items have been input or set, use the
"RECONNECT" and press the
7
Finalize the setting.
<1> Use the button to highlight [OK] and press the
The setting will be stored in the memory of the projector.
page 17).
button once to highlight the "PROFILES" field and press the
button to highlight "PROFILE 1" or "PROFILE 2", and press the
button.
4. Setting the LAN Setting of Projector
page 19).
page 19,20).
page 20).
SELECT /
button.
4
button to highlight
29