NEC NP901W - WXGA LCD Projector Network Setup Manual
Wired and wireless network setup guide
Hide thumbs
Also See for NP901W - WXGA LCD Projector:
- User manual (166 pages) ,
- Install manual (17 pages) ,
- Installation manual (9 pages)
Table of Contents
Advertisement
Quick Links
NEC Projector
NP905 / NP901W
Wired and Wireless Network Setup Guide
Information on USB Wireless LAN:
The NP905/NP901W series projectors distributed in some areas and countries do not come
standard with the USB Wireless LAN Unit.
If you purchase the projector without the USB Wireless LAN Unit installed and need to present
to the projector via a wireless connection, the optional USB Wireless LAN Unit must be
installed.
Install in the PC the software stored in the User Supportware 5 CD-ROM.
This manual describes the LAN settings to use the software programs included in
the supplied User Supportware 5 CD-ROM. For how to operate each software
program, refer to "User's Guide" (PDF) on User Supportware 5 CD-ROM.
1. What You Can Do with User
2. Operating Environment
US
(
B
LAN
)
USB
S-VI
DEO
IN
AUD
LAN
IO
IN
VIDE
COM
COM
O IN
L/MO
PON
PUT
ER
3. Connecting LAN Cable
NO
ENT
/
1 IN
AUD
IO
R
IN
AUD
MON
IN
IO
ITOR
OUT
COM
COM
L/MO
NO
PON
PUT
ER
AUD
ENT
2 IN
/
HDM
R
OUT
IO
I IN
AUD
PC
IO
IN
CON
TRO
L
AC
IN
4. Setting the LAN Setting of
5. Setting the LAN Setting of Personal
6. Setting the LAN Setting of Personal
7. Refer to "User's Guide" and
Supportware 5
Projector
Computer ([Example] Wireless LAN of
Windows Vista : Ad Hoc connection)
Computer ([Example] Wireless LAN
of Windows XP:Ad Hoc connection)
Help
1
2
3
4
5
6
7
Advertisement
Table of Contents
Related Manuals for NEC NP901W - WXGA LCD Projector
Summary of Contents for NEC NP901W - WXGA LCD Projector
- Page 1 NEC Projector NP905 / NP901W Wired and Wireless Network Setup Guide 1. What You Can Do with User Supportware 5 2. Operating Environment S-VI VIDE O IN L/MO 3. Connecting LAN Cable 1 IN ITOR L/MO 2 IN I IN 4.
- Page 2 (3) Great care has been taken in the preparation of this guide; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.
-
Page 3: Important Information
Important Information Important Information USB Wireless LAN Unit FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 4 Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz. Hereby, NEC Display Solutions, Ltd. declares that this USB Wireless LAN Unit (Model: NP01LM) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
- Page 5 Important Information Important Information Improper intrusions • Malicious third parties may without permission access the personal or company network and steal personal or confidential information, pretend to be someone else and leak incorrect information, rewrite information that has been intercepted, introduce computer viruses or otherwise damage data or the system, etc.
-
Page 6: Specifications
Specifications Specifications For United States, Canada, and Mexico Product Name NP01LM3 Operating Voltage 5V (power supplied from the projector) Max Amps Tx: 472 mA (Max) Rx: 300 mA (Max) Wireless Standard IEEE802.11a, IEEE802.11b, IEEE802.11g Modulation Method CCK/DQPSK/DBPSK/OFDM LED Display During communication: blinking (Blue) Standby: slow blinking No operation: light off... - Page 7 Specifications A wireless LAN can be used in the following countries and areas. Using a wireless LAN in a country or area other than the following may infringe the radio wave laws of the country where it is used. Austria / Belgium / Bulgaria / Cyprus / Czech / Denmark / Estonia /Finland / France / Germany / Greece / Hungary / Iceland / Ireland /Italy / Latvia / Liechtenstein / Lithuania / Luxembourg / Malta /Norway / Poland / Portugal / Romania / Slovak / Slovenia / Spain /Sweden / Switzerland / The Netherlands / United Kingdom...
-
Page 8: Table Of Contents
Contents Contents Introduction ................Inside cover Important Information ...................3 Specifications ....................6 Contents ......................8 1. What You Can Do with User Supportware 5 ........... 9 1-1. Image Express Utility 2.0 ..................9 1-2. Desktop Control Utility 1.0 .................. 11 1-3. Ulead Photo Explorer 8.0 SE Basic ..............12 1-4. -
Page 9: What You Can Do With User Supportware 5
● High-speed, high-quality image transmissions based on NEC’s original compression algorithm NEC’s original compression algorithm allows high-quality images to be sent over the network at high speed, from your personal computer to the projector. S-VID... - Page 10 1. What You Can Do with User Supportware 5 ● Projected images can be transferred and saved to personal computers. When “Meeting Mode” is used, projected images can be sent to the personal computers of all the participants (attendants) of a “Meeting”. The received images can be saved to your personal computer with a memo (text data) attached.
-
Page 11: Desktop Control Utility 1.0
(important documents), copying files, or turning off the power. NEC assumes no liability for any loss or damages arising from information leak or system failure while you are using Desktop Control Utility 1.0. -
Page 12: Ulead Photo Explorer 8.0 Se Basic
● Ulead Photo Explorer 8.0 in the User Supportware 5 CD-ROM has functions that allow you to use the projector more conveniently, in addition to the functions that come with the software, for when an NEC projector is connected. Additional functions are listed below. -
Page 13: Viewer Ppt Converter 3.0
1. What You Can Do with User Supportware 5 1-4. Viewer PPT Converter 3.0 Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/ 2000/ 2002/2003/2007 into an index file that can be displayed with the viewer function of the projector. ●... -
Page 14: Operating Environment
2. Operating Environment 2. Operating Environment 2-1. Supported Projector User Supportware 5 supports the following NEC projector (as of March 2008) NP Series NP3150/NP2150/NP1150/NP3151W/NP905/ NP901W VT Series VT800* * The wireless LAN cannot be used with VT800. Reference Some of software can be used with projectors other than the above projectors. For details, refer to the help function of each software. -
Page 15: Operating Environment
2. Operating Environment 2-3. Operating Environment The following is the operating environment for Image Express Utility 2.0. For the operating environment of other software, please refer to the help function of each software. Supported OS Windows Vista (32-bit version) Home Basic Windows Vista (32-bit version) Home Premium Windows Vista (32-bit version) Business Windows Vista (32-bit version) Ultimate... -
Page 16: Connecting Lan Cable
3. Connecting LAN Cable 3. Connecting LAN Cable Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector to wired LAN. After connecting LAN cable to the projector, set the required settings for the projector next page). -
Page 17: Setting The Lan Setting Of Projector
4. Setting the LAN Setting of Projector 4. Setting the LAN Setting of Projector Reference For how to turn on/off the power to the projector and how to operate the buttons and remote control of the projector, refer to “User’s Manual” included in the User’s Manual CD-ROM. - Page 18 4. Setting the LAN Setting of Projector Press the button to highlight the “INSTALLATION (2)” tab. SELECT Press the button to highlight “NETWORK SETTINGS”, and press button. The “NETWORK SETTINGS” screen will be displayed. • To make setting of wireless LAN Proceed to “4-2.
-
Page 19: Wireless Lan
4. Setting the LAN Setting of Projector 4-2. Wireless LAN When connecting the wireless LAN, configure the LAN settings in the “WIRELESS” page of “NETWORK SETTINGS” selected from On-Screen Menu. Note The wireless LAN cannot be used with VT800. ■ Flow of Setting Step Display "WIRELESS"... - Page 20 4. Setting the LAN Setting of Projector ■ Setting Wireless LAN Display the “WIRELESS” page of “NETWORK SETTINGS”. Configure the setting of wireless LAN in the “WIRELESS” page of “NETWORK SETTINGS” selected from On-Screen Menu. <1> In the “NETWORK SETTINGS” setting window, if the “GENERAL” tab is highlighted, press the button to highlight “WIRELESS”.
- Page 21 4. Setting the LAN Setting of Projector Set “DHCP”. Check this check box if the network to which the projector is to be connected automatically assigns the IP address via the DHCP server. SELECT <1> Press the button once to highlight the “DHCP” check box and press the button.
- Page 22 4. Setting the LAN Setting of Projector Input “SUBNET MASK”. If “DHCP” is not checked, input the subnet mask of the network to which the projector is connected. The method of inputting is the same as that of the “IP ADDRESS” field. Input “GATEWAY”.
- Page 23 4. Setting the LAN Setting of Projector Select SSID from “SITE SURVEY” (if necessary). A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are to be connected are selected from this list. When SSID is selected from the list, the “SSID” field, “TYPE”...
- Page 24 4. Setting the LAN Setting of Projector Select “NETWORK TYPE” (if necessary). The communication mode of the SSID selected in “SITE SURVEY” are automatically selected. The settings can be changed by moving the highlight to the “NETWORK TYPE” field and pressing the button.
- Page 25 4. Setting the LAN Setting of Projector Select “SECURITY” page (if necessary). Proceed to step if WEP, WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP is not set. SELECT / <1> Use the button to select the “CONNECTION” tab, and press the button to highlight the “SECURITY” tab. The “SECURITY”...
- Page 26 4. Setting the LAN Setting of Projector Input “KEY 1” to “KEY 4” (only when WEP is selected). If “WEP (64BIT)” or “WEP (128BIT)” is selected from “SECURITY TYPE”, input an encryption key. Set the same encryption key as the wireless access point and personal computer to be connected by the wireless LAN.
- Page 27 4. Setting the LAN Setting of Projector Finalize “ADVANCED”. <1> Use the SELECT / button to highlight [OK] and press the button. The “WIRELESS” page will be displayed again. Reconnect the network. <1> Use the SELECT / button to highlight “RECONNECT” and press the button.
-
Page 28: Wired Lan
4. Setting the LAN Setting of Projector 4-3. Wired LAN When connecting a LAN cable to the LAN port of the projector, configure the LAN settings in the “WIRED” page of “NETWORK SETTINGS” selected from On-Screen Menu. ■ Flow of setting Step Display "WIRED"... - Page 29 4. Setting the LAN Setting of Projector ■ Setting Wired LAN Display the “WIRED” page of “NETWORK SETTINGS”. Configure the setting of wired LAN in the “WIRED” page of “NETWORK SETTINGS” selected from On-Screen Menu. If “NETWORK SETTINGS” is not displayed, refer to “4-1. Displaying On-Screen Menu (NETWORK SETTINGS)”...
-
Page 30: Setting The Lan Setting Of Personal Computer
5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personal computer and projector, by using the wireless network setting function with Windows Vista Ultimate. - Page 31 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) If you are not connected to a network, the following window will be displayed. Click Click [Connect to a network]. A list of the networks you are able to connect to will be displayed. Click Click From the list, click the SSID of the projector you want to connect to (“NECPJ”...
- Page 32 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) When the screen shows “Successfully connected to NECPJ”, check “M Save this network” and click [Close]. “Set Network Location” window will be displayed. Note •...
- Page 33 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) Click [Use the following IP address], and input [IP address] and [Subnet mask]. • If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “Example of settings for projector”...
-
Page 34: Setting The Lan Setting Of Personal Computer
6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personal computer and projector, by using the wireless network setting function with Windows XP Service Pack 2 (SP2). - Page 35 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) Right-click the [Wireless Network Connection] icon and click [Property]. Right-click Click A property window for wireless network connections will be displayed. From the list of [This connection uses the following Items:], select (click) [Internet Protocol (TCP/IP)] and click [Properties].
- Page 36 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) Click [Use the following IP address:], and input [IP address]and[Subnet mask]. • If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “Example of settings for projector”...
- Page 37 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) Right-click the [Wireless Network Connection] icon and click [View Available Wireless Networks]. Right-click Click The “Wireless Network Connection” window is displayed. From the list, select SSID of the projector to be connected and click [Connect]. Click Click The “Wireless Network Connection”...
- Page 38 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) Input WEP key to set up an encryption key and click [Connect]. • Input an encryption key of “WEP”. Enter “NECDS” in the Network key box, for example, if you have the WEP setting on the projector side configured with “64bit”...
-
Page 39: Refer To "User's Guide" And Help
7. Refer to “User’s Guide” and Help 7. Refer to “User’s Guide” and Help Each software program in User Supportware 5 contains each help file that explains the functions and operation methods in detail. Also, “User’s Guide” (PDF) explains the basic operation procedure of each software program carefully. - Page 40 7. Refer to “User’s Guide” and Help Reference If the above menu is not displayed, follow these steps. (*Example when Windows Vista is used) 1. Click [Start] of Windows. 2. Click [All programs] → [Accessories] → [Run]. 3. In the [Open:] field, enter the CD-ROM drive name *1 (e.g., “Q:\”) followed by “SETUP.EXE”...
-
Page 41: Using Help
CD-ROM. ■ Displaying Helps other than Ulead Photo Explorer 8.0 Click in the following order. Start All Programs NEC Projector User Supportware Desktop Control Utility 1.0 Desktop Control Utility 1.0 Help Image Express Utility 2.0 Image Express Utility 2.0 Help PC Control Utility 3.0... -
Page 42: Help Screen Layout
→ [Ulead Photo Explore 8.0 SE Basic], in that order. The Ulead Photo Explorer 8.0 will start. From the Ulead Photo Explorer 8.0 menu bar, select [Help] → [Ulead Photo Explorer Help] or [NEC Projector User Supportware Help]. ■ Help Screen Layout [Hide] button Shows/hides the left pane. - Page 43 Other manufacturer names and product names in this document are registered trademarks or trademarks of the respective companies. ©NEC Display Solutions, Ltd. 2008 Printed in China First edition March 2008 Reproduction, modification, and other uses are prohibited without the permission of NEC Display Solutions, Ltd.
-
Page 44: User Supportware
NEC Projector User Supportware 5 I Image Express Utility 2.0 I Desktop Control Utility 1.0 I Ulead Photo Explorer 8.0 SE Basic I Viewer PPT Converter 3.0 I PC Control Utility 3.0 7N8P8461...