NEC NP901W - WXGA LCD Projector Network Setup Manual page 23

9
Select SSID from "SITE SURVEY" (if necessary).
A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are
to be connected are selected from this list. When SSID is selected from the list, the "SSID" field,
"TYPE" field and "CHANNEL" field will also be automatically set.
SELECT
<1> Press the
Searching SSID will begin.
When searching SSID is complete, a list of SSID is displayed.
Icon
............ Wireless access point
........... WEP, WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP setting
<2> Use the SELECT /
Press the
If the SSID to be connected is not on the list, press the
Note
To connect SSID for which WEP or WPA-PSK, etc. is set, the same setting must be made on
the projector (
10
Input or edit "SSID" (if necessary).
SSID selected in "SITE SURVEY" are automatically input.
If the highlight is moved to the "SSID" field and the
displayed and characters can be input or edited.
The default setting of the projectors is "NECPJ".
button once to highlight "SITE SURVEY" and press the
button to highlight the SSID of the network to be connected.
button once to highlight [OK] and press the
page 25).
4. Setting the LAN Setting of Projector
............ Personal computer (AD HOC)
button.
EXIT
button is pressed, a software keyboard is
button.
4
button.
23