Buffalo AirStation NFINITI High Power WHR-300HP User Manual page 54

Chapter 4 Configuration
Parameter
Exclusive SSID for WEP
Encryption level expansion
Dedicated WEP SSID isolation
Allow WEP for Game Console Only
AOSS Button on the AirStation Unit
Current Encryption Information
AOSS Connection only
Random
KEY base
Reset
AOSS Client Information
AOSS Connection only
AOSS Ethernet Converter Information
AOSS Connection only
Meaning
Initiates AOSS automatic wireless configuration. Click this, then
press or click the AOSS button on your AOSS-compatible wireless
client. Repeat for additional AOSS clients.
Click this button to disconnect all AOSS connections.
Note: If AOSS connections are disconnected, the SSID and encryption keys
will be restored to their most recent settings before using AOSS.
You may allow a separate SSID specifically for WEP connections. If
[disabled] is selected, then clients will not be able to connect with
WEP.
Expands security method from TKIP to WPA/WPA2-PSK-mixed mode.
Set a separate SSID and network segment specifically for WEP
connections. Devices connected with WEP will not be able
to communicate with devices connected using AES/TKIP. All
connected devices will be able to communicate with the internet.
When enabled, the AirStation allows wireless devices to connect
with 64-bit or 128-bit WEP.
Uncheck to disable the physical AOSS button on the AirStation.
Displays the encryption type, SSID, and encryption key that AOSS
has configured.
Click to enter random values for SSID, encryption key, and other
settings.
Click to return the SSID, encryption key, and other wireless
settings to the values on the Setup Card.
Click to return the SSID, encryption key, and other wireless
settings to their previous values.
Displays basic information for AOSS clients connected to the
AirStation.
Displays basic information for Ethernet converters connected to
the AirStation via AOSS.
- 53 -