Chapter 3 Installation
5
Connect the AirStation's LAN port to your computer with another LAN cable.
Turn on the AirStation, wait 60 seconds, and then turn on your computer.
AirStation
power outlet
6
Confirm that the devices are connected correctly as shown below.
power outlet
7
After the computer has booted, the LEDs on the AirStation should be in the following condi-
tion:
Power
Wireless
Router
Diag
LAN
Internet
Refer to pages page 5 and page 7 for LED locations and other details.
8
Launch a web browser. If the home page is displayed, setup is complete.
If username and password fields are displayed, enter "admin" for the username and
"password" for the password, then click [OK]. Follow the instructions on the screen to
complete setup.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
1) connect
ROUTER
ON
OFF
AUTO
LAN
1
2
1) connect
3
LAN cable
4
INTERNET
POWER
2) connect the power supply
computer
ON
modem
Green LED on
Green LED on or blinking
Green LED on or off depending on your network
Off
Green LED on or blinking
Green LED on or blinking
PC
- 13 -