Buffalo AirStation NFINITI High Power WHR-300HP User Manual page 37

Chapter 4 Configuration
Parameter
Auto Input
LAN Side IP Address
DHCP Server
DHCP IP Address Pool
PPTP Server
Authorization Type
Server IP Address
Client IP Address
DNS Server IP Address
WINS Server IP Address
MTU/MRU Value
Edit PPTP User List
Add new user
Advanced Settings
PPTP User List
Meaning
Click to generate a random IP address.
Set a LAN side IP address and subnet mask.
If enabled, the DHCP server will assign LAN-side IP addresses automatically.
You may choose the range of IP addresses assigned by the DHCP server and
select IP addresses to be excluded from that range. Values from 1-256 may
be entered.
Enable to use a PPTP server.
Select the authentication method for PPTP connection.
Select the server IP address.
Select the IP address range.
Set the DNS server IP address for the DNS server to issue to clients.
Set the WINS server IP address for the WINS server to issue to clients.
Configure MTU (Maximum Transmission Unit) / MRU (Maximum
Receive Unit) between 578 and 1500 which is used during
transmission on PPTP.
Click to edit user information.
Click [Edit PPTP User List] to display.
Username
Enter the username to connect to the PPTP server. You may enter
up to 16 alphanumerical characters and symbols.
Password
Enter the password to connect to the PPTP server. You may enter
up to 16 alphanumerical characters and symbols.
Method of Acquiring IP Address
Select the method to be used to assign the IP address is assigned
to the PPTP client.
Displays the PPTP connection user information.
- 36 -