All Target Systems Do Not Have The Same Administrator Credentials; Multiple Vpm Servers; Administrator Credentials Have Been Changed; Uninstalling Vulnerability And Patch Management - HP Xw460c - ProLiant - Blade Workstation User Manual

Be sure that the DNS suffix for this connection field has the correct DNS suffix and that both the Register this
connection's addressees in DNS and Use this connection's DNS suffix in DNS registration checkboxes are
selected.

All target systems do not have the same administrator credentials

For target systems that have individual administrator credentials, configure WBEM credentials individually
to enable access to these target systems.
1. From within HP SIM, select Options Protocol Settings System Protocol Settings.
2. Select the system to configure, and then click Apply.
3. Enter the appropriate WBEM credentials, and then click Run Now.

Multiple VPM servers

Target systems cannot be scanned and patched by multiple VPM servers. The deployed VPM Patch Agent
is set up to respond to only one VPM server.

Administrator credentials have been changed

If the administrator credentials have been changed for target systems, the WBEM credentials must be
reconfigured. To reconfigure Global Protocol Setting, select Options Protocol Settings Global Protocol
Settings.

Uninstalling Vulnerability and Patch Management

Use either of the following methods to uninstall Vulnerability and Patch Management. The VPM uninstallation
must be performed from the VPM server.
VPM scan results can be retained after uninstallation. The last scan performed can be accessed from the
VPM column. If you choose to delete scan results, the VPM column is set to an initialized state.
IMPORTANT:
Vulnerability and Patch Management Pack troubleshooting 145