Supported Hp Accessories - HP Brio 80xx Upgrade Manual

Supported HP Accessories

This chapter describes how to install memory, storage devices (such as a hard disk drive, floppy disk drive, CD-ROM
drive, Zip drive, or tape drive), and expansion cards in your computer.
Your computer might have one or more expansion cards preinstalled. Some of the additional accessories that you can
add to your computer are shown here.
Second 3.5-
inch Hard
Disk Drive
bay
Preinstalled
3.5-inch
Floppy Disk
Drive
(Drive A)
Preinstalled
3.5-inch
Hard Disk
Drive
(Drive C)
Expansion
Cards
For example,
a LAN card
† Sockets are shown filled. Empty sockets indicate that an upgrade is
possible.
Front-Access Device Shelves
· IDE CD-ROM Drive bay
· Tape or Zip Drive bay
· 5.25-inch Floppy or Hard Disk Drive bay
· Preinstalled 3.5-inch Floppy Disk Drive (Drive A)
· Second 3.5-inch Floppy Disk Drive bay
Backplane connector
Front Bezel
VESA Feature Connector
Video Memory Upgrade
†
Modules
1 MB (2 512 KB modules)
2 Installing Accessories in Your Computer
Supported HP Accessories
IDE and Floppy Drive
Power Connectors
Connectors
(to power supply)
JP37
JP5 JP7
B A D C
System Board
System Board
Configuration Jumpers
Backup Battery
Front Bezel Switch
Connector
Memory Module Order:
Left to right: A, B, C, D
Main Memory Upgrade
†
Modules
8 MB, 16 MB or 32 MB
Front Bezel Fan
Connector
Processor Fan
Connector
Processor Upgrade
20