Configuring LAG Membership
The LAG Membership page contains fields for defining membership for LAGs.
To define LAG membership:
1. Click Layer 2 > Interface > LAG Membership. The LAG Membership page opens:
LAG Membership
The LAG Membership page contains the following fields:
❏
LAG — Displays the port which is attached to the LAG.
❏
Name — Displays the user-defined port name.
❏
Link State — Indicates if the LAG is currently linked. The possible field values are;
◆
Up — Indicates the LAG is currently linked and is forwarding or receiving traffic.
◆
Down — Indicates the LAG is not currently linked and is not forwarding or
receiving traffic.
❏
Member — Indicates if the port is currently attached to the LAG.
Embedded Web System User Guide
www.hp.com
Configuring Interfaces
6-7